Center Console for Segway miniPRO Replacement Instructions

Tools Required: 2.5 mm hex wrench

Removal

  • Make sure the miniPRO is powered off and the charger is not c
  • Remove the following components:
    • Battery

WARNING!

Press the Power Button until all lights are off to discharge any power remaining in the miniPRO.

    • Steering Knee Controlled Bar
    • Steering Assembly
    • Front Decorative Strip
    • Rear Decorative Strip
    • Both Foot Pads (Mats)
  • Using a 5 mm hex wrench, remove the six fasteners shown in the picture below:
  • Gently lift the Center Console and disconnect the harness as demonstrated in the picture below:

Installation in the reverse order.