Top Cap for the Guide Bar of the Knee Controlled Bar
Tools Required: #2 Phillips-head screwdriver
Removal
1. Make sure the miniPRO is powered off and the charger is not connected.
2. Remove the Steering Bar.
3. Lift the Guide Bar
4. Using a #2 Phillips-head screwdriver, remove the two fasteners shown in the picture below.
2. Remove the Steering Bar.
3. Lift the Guide Bar
4. Using a #2 Phillips-head screwdriver, remove the two fasteners shown in the picture below.
5. Remove the Top Cap for the Guide Bar
You can order replacement top cap for the guide bar of the knee controlled bar here.